Due to local laws and the environmental impact, draining your water softener backwash straight into the ground is not always a viable option.

Salt bridging can wreak havoc on your water softener system by severely reducing performance or eventually even damaging it.

Salt mushing can wreak havoc on your water softener system be either severely reducing performance or eventually even damaging it.

Water softener salt poses no direct threat to a concrete floor or pavement. However, it can accelerate deterioration of poor quality concrete in colder conditions.

Without any salt, your water softener will no longer be able to soften water. Unless your water is iron-rich this should not have any permanent consequences.

When storing water softener salt it is important to keep out any contaminants, here are some top tips to keep in mind when storing your salt to avoid any issues.

Boiling water evaporates while salt does not, thus increasing the salt concentration. Other methods like distillation remove sodium from your water.

Water softener backwash has a big impact on any environment. Here are some options for reusing your water softener discharge.

Converting between gpg and ppm might seem like a daunting task, but do not fear! With our simple calculator you will convert those units in no time!

If used according to the manufacturers directions, Iron OUT is safe to use in your water softener as it will not mix in with your homes water supply.

If used according to the manufacturers directions, Rust Out is safe to use in your water softener as it will not mix in with your homes water supply.

If used according to manufacturers directions, OUT Filter Mate is safe to use in your water softener and will not mix in with your homes water supply.

Immediately after installation, your water softener will soften your water, however it can take up to several days before you can enjoy a soft shower.

Your water softener hardness setting depend on your waters hardness level and iron concentration, use our easy calculator for your optimal setting.

An overlook of the types of irons generally found in well water, their effects on our daily lifes, and how to treat and eliminate them effectively.

Water softeners do not directly cause a drop in water pressure, however a badly maintained system can cause a drop due to blockages.

A water distiller needs to generate heat to boil water, the more water you boil the more electricity it needs. Luckily most systems are highly efficient.

A water softener is specifically designed to remove hard molecules through ion exchange as chlorine does not contain ions it will not be filtered out.

Unfortunately your water softener will not last forever, here are a couple of signs to look out for whether it is time to replace your system.

A water softener requires quite a bit of your time for maintenance, could be bad for your health and the environment.

Unfortunately your water softener will not last forever, here are a few tips to dispose of your old system as you replace it with a new one.

A water softener rough-in means doing the initial plumbing and other work that is needed to your home for the final system installation.

If the water from your water softener leaves behind white residue this is often a sign that something may be wrong with you system.

There are all sorts of reasons why your water softener could be overflowing, luckily for most reasons there is an easy way to fix the problem.

An up-flow water softener will not only be easier on your wallet and the environment, but it will also be easier to maintain and give you a more hassle-free experience.

Water softener salt will soften the water in your pool, use it if you are in a pinch but there are more (cost) effective methods out there.

Water descalers will help you soften your water, however, they will not remove any hard water molecules, thereby leaving your appliances and piping vulnerable.

No matter what type of water softener you have can always use water during regeneration. However, in some cases, you might end up with hard water.

Clogged pipes, soap scum, itchy clothing, here are some of the most common problems that households with hard water can encounter.

If your water contains a lot of contaminants it is wise to install a carbon filter, this ensures cleaner water and better performance for your water softener.

Even though some water softeners will remove iron for your water, they are not built for it. Therefore it may be wise to install an iron filter.

Confused about whether your water softener is working or not? Don’t fret, we’re here with a guide on how to check if your water softener is performing correctly!

Although a water softener will reduce scale build-up in your water heater, as water softeners use salt they can introduce corrosion in your water heater.

These tips and tricks will help you keep your water softener resin clean and your water softener performing like on the day you bought it!

Whether or not you need a water softener is highly depended on how hard your water currently is. If very hard water is left untreated your appliances may suffer.

Installing your water softener outside is a perfect solution. However to choose the right spot there are a couple of things to keep in mind.

A water softener may seem expensive, but hard water can cause severe damage to your homes appliances. In the long run a water softener can reduce your costs.

Pool salt is not as pure as water softener salt, therefore it may cause a temporary clog in your system or even permanently break the system.

Foamy water from your water softener is most likely caused by a faulty air control valve that allows air to leak in through the brine tank.

Water softener regeneration should be triggered based on water hardness, water usage, and grain capacity. How its regulated depends on the type of system.

A water softener loop provides access to the water main, a drain and sometimes a power outlet to allow for easy installation of your water softener system.

Maintaining your water softener regularly will increase its performance as well as its lifespan. Follow this checklist for an optimal result!

Overfilling your water softener with salt is possible and doing so leads to salt bridges, salt mushing and is a waste of high-quality salt.

Although water softener resin is not toxic it does contain several chemicals which are not biodegradable. Because of these chemicals it is impossible to recycle.

Carbon absorption deals well with everyday compounds like chlorine that can be harmful to your water softener. A filter can help increase its lifespan.

More pressure in the tank than it can handle could lead to an explosion. The best way to avoid this is detecting the problem beforehand and regular maintenance.

Soft water has many advantages, but it can also be disadvantageous to your health, the environment, your pets, your plants or your skin.

A water softener before or after the water heater is both possible. However, placing your water softener before you heater can reduce the lifespan of the heater.

Crushing water softener salt is hard. With the right tools, like a hammer or a blender, you will crush it in no time.

An excess of water softener salt can be used to melt the ice or snow on your driveways and walkways in the winter or for killing weeds on your property.

Pink stains in your shower or toilet are often caused by the Serratia Marcescens bacteria. Although easily treated with bleach, long term prevention is difficult.

Algae growth in your water softener system is easily treated with chlorine, however, to prevent it from returning, it is important to take the right precautions.

Because Borax is a precipitating water softener many of the downsides of hard water remain during usage. Calgon offers a great alternative for softening water.

Borax is a great water softener, however as a precipitating water softener and with growing concerns around health impact there are better alternatives available.

Potassium is a great substitute for sodium in your water softener system. However, despite the big benefits, the cost may not be worth it.

Hard water can cause a lot of problems in your home, luckily there are loads of methods available for removing hardness from your water.

Hard water causes lasting damage, a water softener prevents these damages by reducing the concentration of calcium and magnesium bicarbonate in your water.